I forgot about the Firmware tab. No way to set the date. In looking at the log, it is not clear on the unit of measure for each sample.
I forgot about the Firmware tab. No way to set the date. In looking at the log, it is not clear on the unit of measure for each sample.
I don\'t see anyway to set the date and time. In looking at the log file, the date and time fields are empty.
With the WiFi module (1.6) and the REC-BMS (2.8) configured, I have a couple of questions My understanding is the REC-BMS checks the battery voltage and requests charging from the SI. I have inc...
I started from scratch to make sure I have all the right software running in the BMS and WiFi. reloaded the BMS firmware hardware reset of the WiFi module reconfigure WiFi module inst...
Backdated the firmware by removing the SD card, deleting the old file versions, reinstalling the card, and restarting the WiFi module. I\'ve attached a screen shot showing the software version. ...
Boy do I dislike software troubleshooting. I used update to reload the files with the versions you provided (which are not different) in the order you recommended I try and got the following err...
The files are all the same between the ones I downloaded and put on the SD card and the files provided above.
The first thing I tried was switching browsers from Chrome to Edge. That eliminated the first problem with the menu blackout. The menu blackout problem was solved by repeating the upload process. ...
Still does not work correctly after doing a full reset and reconfiguration. When setting the maximum cell voltage and the battery pack amp hours the same erroneous numbers are displayed. Seems like...
Scott, Did you experience the same problems with entering settings?
I repeated the download and update procedure. Same problems as shown above. I took the next step to manually install the updated firmware files directly on the SD card: I removed the SD car...
I have seen something like this before and believe it or not the solution seemed to be to leave it powered up for an hour or two, then pull the power for 20 seconds and let it reboot. Its almost l...
