FYI .. 1.6.0 is out now ....
FYI .. 1.6.0 is out now ....
Quote from Trond Arvid Røsvik on August 7, 2022, 2:55 am Quote from Damian Raffell on August 6, 2022, 5:58 am Quote from Trond Arvid Røsvik on August 5, 2022, 3:31 pm At 500 Kbps the Cerbo w...
update since upgrading ... now HW:1.2 SW: 1.5.8 I am getting weird responses ... when i submit - i notice the wifi connection bounce and obviously get no response. Its like its causing my Wifi ...
Quote from Peter Levick on August 6, 2022, 2:51 pm Hey Rick, On this topic, I\'ve encountered the SD card error again. I tried removing and reinstalling the micro SD card and that didn\'t fix...
update since upgrading ... now HW:1.2 SW: 1.5.8 this all worked ok for me in previous releases. After unlocking ... I am trying to use the Manual Communications in the Firmware page ... just...
Quote from Trond Arvid Røsvik on August 7, 2022, 2:55 am I tried this, and Cerbo sees the WS500 and ABMS, but the WS500 would not see the ABMS. Are you sure your WS500 is in Sync Mode? ...
Quote from Trond Arvid Røsvik on August 5, 2022, 3:31 pm At 500 Kbps the Cerbo will not \"see\" the WS500. My Cerbo acts as a CAN hub for the WS500 and the ABMS (they connect individual...
OK - I have upgraded my WS500 to 2.5.0 & my Cerbo GX to 2.90-14 I cant see any Wakespeed info ? I assume it should show up in the Device list. The Bus is working fine between GX, ABMS &am...
Quote from Trond Arvid Røsvik on August 3, 2022, 9:19 am Quote from Damian Raffell on August 2, 2022, 4:26 am I believe i am experiencing something like this as well.... ? FYI. I have ABMS, ...
Thanks all for the Feedback. FYI ... i have 4S8P CALB 100\'s I figured it maybe my REC settings and have since tweaked them. I have posted the current settings for review. I did originally...
I believe i am experiencing something like this as well.... ? FYI. I have ABMS, wifi, LCD, Balmar XT170, WS500, Cerbo GX, Victron Multi\'s and Victron MPPT x 4 all CAN or VE connected. With t...
I too have just updated from HW:1.0 SW:1.5.1 using the 1.2 files now says HW:1.2 SW: 1.5.8 All looks ok.
Im interested in this too. I have an ABMS, LCD & Wifi. (bought direct from REC, early) I have just updated to 1.5.1 and it states HW:1.0 - all seems OK. But if it is really HW:1.0 can ...
