Hi Gerard, for my purposes a critical error is defined as an error that causes the contactor to open. Based on my research, here's what actually opens the contactor on the REC ABMS (vs. wha...
Hi Gerard, for my purposes a critical error is defined as an error that causes the contactor to open. Based on my research, here's what actually opens the contactor on the REC ABMS (vs. wha...
Hi All, Big shout out to REC and Tine for building this as a custom — it started as a specific request but I think it has broader relevance, which is why I'm sharing it here. MODE 3 is a cu...
Hi All, I am done with physical install of by LFP build - ABMS - 960Ah. It's time to get the configuaration in order. 1 ) ABMS Software version 2.96, HW 2.1. 3) Cerbo GX v3.67, Multiplus II 23/3...
1) I am integrating a LFP ABMS based battery with Cerbo GX and WS500 already in the system. I would like to confirm that the REC Victron CANBus cable is internally terminated and it is suffci...
@Ben what do you mean by "The switch is NC model, keep that in mind."? The ABMS mini switch I refer to has to positions and appears to be a simple on-off switch that connect power to the BMS. ...
Update. I still experience randon disconnections. I have tried different firmware configurations and gotten the latest from Tine. Currently as running as follows: The signal is otherwise strong. T...
Hi all, I'm building and testing a 3P4S battery using EVE314Ah cells. The battery's size is pushing the limits of the ABMS's balancing capabilities. I'm considering integrating a Heltec 5A active...
If you have a Cerbo gx, the Venus OS large and associated node-red functionality reportedly allow to set the charging parameter such that you could charge 5 times to 80% and the eight t...
@Ben de Groot thank you. I have brifly tried to have the REC Wifi module to join the boat AP, but unsucessfully. I admit, that have not tried hard enough. But I will get the 1.6.2 from OGM and see...
Hi Ben, Thank you for looking into this. It is the latest, the REC-WiFi-module-firmware-update-1.6.3-March-28-2024 firmware, which I installed on first connection along with all available firmwar...
Hello, For context, I am installing an ABMS-PreCharge-WiFi with LFP 3P4S EVE314 cells on a boat. The WiFi functioned correctly during bench testing in the shop. However, once installed on the boa...
@Bill C. seem the most sensible think to do. Thanks for replying.
What do you guys and gals do with the tiny tiny on-off switch on the BMS harness. Replace with human size? OR somehow install. If you install i'd love to see how. I am tempted to just leave it hid...
I am using three Blue Sea Systems mini bus bars to connect 8 sensors to an ABMS. I have tested up to two on the bench, and they show properly in the interface. Short of using some heat or cold to t...
Greetings all. I am configuring and integrating a LiFePo4 stans alone 3P4S 12V (942 Ah) with REC Active MBS w/wifi and precharge in my current system which I describe at the bottom. I am looking ...
