REC Master/Slave Cable -1M

This cable has a special ground connection to Pin1 for use with the Master to the first slave.  One per system is required.

This cable is used when you have multiple Q series BMS's connected to a REC BMS MASTER UNIT 9M.  It is 1M long and include a 120 ohm Terminator in the DB9 end.  For use with the DB9-RJ45 Adapters that get mounted on the slaves

Available in 3 ft or 6 ft lengths (1-2M) CAT6

Use an RJ45 Coupler to extend it longer if needed