Time to go available on CAN?

• C

  Christopher

  12/20/23, 4:47 PM

  Am I correct that time-to-go is not transmitted from the BMS over CAN? I don't see it listed in the 2Q manual, or on the GX 50 display.

  0 likes 0 likes Liked Like

  ---

  4
  Posts

  56
  Views

  Reply

  ---

• R

  Rick OGM Support Staff

  12/21/23, 9:14 AM

  Lots of other detail on the battery pack but I am not seeing it either.  I will put in a request to REC to see if we can add that in a future release

  

  

  0 likes 0 likes Liked Like

  ---

• C

  Christopher

  12/21/23, 11:40 AM

  @Rick That would be great. This is a very important piece of data for us electric boaters to have in the cockpit. Will have to revert back to my BVM for the time being. Hopefully it tracks with the BMS SOC and time remaining.

  0 likes 0 likes Liked Like

  ---

• t

  tine

  1/3/24, 4:57 AM

  No can't do. It does not work like this. Victron CAN bus protocol was provided to us and all the CAN data is supported. To get the Time to go, they would have to add this feature or a programmer should add it into their open-source. With the LCD and WiFi we calculate it from the SOC, SOH and floating avarage current value.

   

  0 likes 0 likes Liked Like

  ---