How to test REC 2Q BMS internal fuses

• R

  Rick OGM Support Staff

  4/29/25, 9:08 AM

  The 2Q includes 2 internal fuses, one for power and the second for the Opto relay output.

  1. Remove all 8 M10 screws from the front and back covers
  2. open case and remove the flush mount screw using a 9/64 hex key that holds on the daughter board
  3. gently pry the daughter board off the main board
  4. Remove the 2 fuses and test.

  See pics for clarification

  

  

  

  0 likes 0 likes Liked Like

  ---

  1
  Posts

  3
  Views

  Reply

  ---