I'm trying to establish a connection with the slave using the software. Unfortunately, without success. Can anyone help. I can't reach the slave, address 1 and 2 are not recognized. What's wrong here?
Master connection 16 with 0 works without problems.
are the green LEDs on the slave blinking about once a second?
Are you using addresses 16 and 1 to try and connect?
Yes, the green light is flashing on the slave. I've tried more settings. It doesn't work.
for most operations you connect to the Master to retreive all slave parameters, not to the slave. Only things like slave firmware updates . I see that your pack voltage is 104 volts so it seems you have a high voltage series configuration.
Yes, it is a high-voltage system. Nevertheless, it should be possible to reach the two slaves. So far without success?
