WS500 Victron Integration Official Documentation

• R

  Richard OGM Support Staff

  9/14/22, 1:26 PM
  Victron has just released some great documentation on its integration with the Wakespeed WS500 Smart Regulator. https://www.victronenergy.com/media/pg/Cerbo_GX/en/wakespeed-ws500-support.html Congratulations to the Wakespeed team for helping to bring Smart Alternator control to the RV/Marine/Industrial and Off grid electrical systems.
  2 likes 0 likes Liked Like

  ---

  4
  Posts

  599
  Views

  Reply

  ---

• R

  Rick OGM Support Staff

  6/12/23, 5:14 PM

  Looks like Victron has made some changes on their site.  Here's the new link.

  https://www.victronenergy.com/media/pg/Venus_GX/en/connecting-supported-non-victron-products/wakespeed-ws500-alternator-regulator-support.html

  0 likes 0 likes Liked Like

  ---

• B

  Bill

  1/27/24, 2:15 PM

  It looks like Victron has changed links again.

  Victron Cerbo GX <--> Wakespeed WS500

   

  0 likes 0 likes Liked Like

  ---

• P

  Peter

  1/29/24, 11:46 AM

  Still waiting for updates to this from Victron or Wakespeed on the new option in V2.5.1 to take data direct from a Victron SmartShunt through the Cerbo GX. Will it only work with a SmartShunt or any Victron Shunt, whichever is set as the Battery Monitor on the Cerbo GX. The configuration and communication guide is light on deatil and a prompt to Victron has gone unheeded.

  0 likes 0 likes Liked Like

  ---