rec abms can access, but says memory card is not working so there is no loggin

• t

  tom

  4/6/25, 5:30 PM

  just started happeneing.  reboot nothing.  i am guessing the only thing is causes is no logging is that right?

   

  everything else is working other than i am still playing with settings.

   

  tom

  0 likes 0 likes Liked Like

  ---

  2
  Posts

  15
  Views

  Reply

  ---

• R

  Rick OGM Support Staff

  4/7/25, 9:17 AM

  It is likely one of two things

  1)  SD card is full

  2)  SD card is corrupted.

  If you remove the 4 screws on the back of the module you will see the SD card.  Push down on the clip and it hinges up out of the way.  Remove the card, insert into a PC and format as FAT32, then reinstall and try it again.

  0 likes 0 likes Liked Like

  ---