Rick, thank you - can it be done without WiFi module?
Rick, thank you - can it be done without WiFi module?
I have a general observation to share. After installing firmware v2.9, we discovered that negative values for Opto(x) CH Hysterisis (OPxH) are no longer supported. Although the system allows for ne...
TMIN - Under-temperature charging disable According to the manual, the charging will be disabled when the temperature reaches the TMIN value. However, I have noticed that the power is also being...
Looking at \'BMS Charge and Discharge Limits\' in VRM I am reading CVL - Charge Voltage Limit (V) as 13.3V. With BMS set as 3.55V end of charge voltage and 0.45V hysteresis CVL is 13.3V. Chan...
Quote from Rick-admin on January 9, 2022, 9:33 am Hi Salvey, The REC BMS functionally acts as a Master DC source on the CANBus network via the Cerbo, and becomes part of the Victron Ecosystem. ...
will it work, at least partially, on 2.4.3 and on 2.5.0-beta? or it is not functional with the latest firmware?
