I should also have noted that this is on a large AGM battery bank so no BMS involvement.
I should also have noted that this is on a large AGM battery bank so no BMS involvement.
Having read through the various documents I would like to check my understanding before I make the install. I have no NMEA2000 network so the only devices will be the WS500 and the Cerbo GX connect...
I do not have any answers on the output of the rpm. It is a pity that the AST command does not display the alternator rpm. Have you used the SCV command to check the settings for the poles and pull...
Reading the current Communications and Programming guide I believe that you have to set ForceTM = 1 in the $SCT line to get the tacho function to work. In the smartphone app this is a definite inpu...
I have been reading the documentation and looking at the Smartphone app prior to buying a WS500. One thing I have read is if you are not using the stator for the rpm then the Configuration and Prog...