I have a WS500 (non Bluetooth) installed along with a Victron system with a Cerbo GX, and a Raymarine Axiom 9+ MFD running the latest firmware. All of the above is functional and networked via the Cerbo but I am unable to select alternator output current for display. I know the data is present as I can view it via the Victron app on the Axiom using VRM but not by presetting it in the Dashboard. The former requires multiple steps to access, this is not ideal when using the display primarily for radar. On earlier Axiom firmware I was able to display output current crudely, but subsequent updates have defeated that. I've posed the question to Raymarine support but have yet to get a useful answer. I also asked if they intended to add a Wakespeed app to the Axiom, the answer was "not at this time".
I'm wondering if anyone on the forum can shed any light on this, thanks.
