@Michael Thanks Michael. I am a little gunshy due to probems with the system over the last several months. I am regaining confidence in it. I had alternator issues that nobody was able to diag...
@Michael Thanks Michael. I am a little gunshy due to probems with the system over the last several months. I am regaining confidence in it. I had alternator issues that nobody was able to diag...
@Al Thanks Al. I have the REC BMS but the regulator is temporarily disconnected to establish a configuration that would work without the BMS. The regulator will be reconnected to the CANBUS sh...
@Michael Thanks. I am going to raise the float voltage to see if that resolvese the issue. the 13.0 value was from the default LiFePO4 profile.
I have a WS500, Balmar XT250 and 840Ah LiFePO4 battery on my sailboat. I have a REC BMS, but it is NOT configured to control the WS500. For now I want to have the WS charge independently. If I have...
