Posts made by Tine

• Silencing the audible alarm

  Well, you know with REC everything is possible when we spend some time and customize the code. I can make an update to silence the error 7 alarm. The programming/testing would cost 25€, played b...

  posted in REC Q Series BMS

  T

  Tine
  11/29/22, 5:22 AM
• REC BMS WiFi firmware update 1.5.8 now released

  WiFi HW 1.0 is not upgradable with HW 1.2 and 2.0 since this were only evaluation modules - prototypes. We have changed the HW later for faster production and improved the hardware for better opera...

  posted in REC Product Announcements

  T

  Tine
  7/28/22, 10:40 PM
• Warning: Internal Failure

  If the BMS has to work hard to balance the cells (new not pre-balanced cells or old cells ) it heats a bit over the set threshold. BMS only signals ERROR 5 by red LED, not sound alarm and sends int...

  posted in REC Q Series BMS

  T

  Tine
  6/1/22, 1:52 AM
• Adding a pin to the main connector

  TE Connectivity crimps 770854-1 may be used.  See ABMS manual for adding extra connections. There is a 3.15 A Slow blow fuse with a 2x3A @ 12 VDC internal relay. We do not recommend to drive 7A bi-...

  posted in REC Active BMS

  T

  Tine
  2/22/21, 10:39 AM
• REC software error on exit

  The problem lies within Windows restrictions. If the folder where the PC user interface is installed does not allow the application to change settings it will not do it. You have to enable the .ini...

  posted in REC Active BMS

  T

  Tine
  2/19/21, 1:52 AM