Jamie, which parameter asks for Parallel strings? Anyway, connecting your cells in 4P4S would result essentially in 1 Parallel string with 1120Ah capacity at 12V In my experience i treat the ...
Jamie, which parameter asks for Parallel strings? Anyway, connecting your cells in 4P4S would result essentially in 1 Parallel string with 1120Ah capacity at 12V In my experience i treat the ...
Thanks Rick Maybe I just dont understand how this works - are there not two Relays and two Optocouplers? RE1L and OP2L being Relay-1 (pin 1,2&13) and OptoCoupler-2 (pin 16&17) respect...
Hi Maybe I\'m just missing something, but going through the values in my Active BMS, I don\'t see a complete instruction set in the REC documentation. I\'m missing the commands to query or se...
Ha! One DOA factory original USB cable. I just got my new OffGrid cable, connected it and lo and behold - off to the races!
I am quite convinced that the cable is dead. There\'s no indication on three different machines when plugging it in. I\'ll see how quick I can get one shipped. Again, thanks for the help! &nb...
Nothing - no beep, no change in the device manager. Yes the BMS is on - I\'ve tried every permutation with it on or off when I plug in the USB. To confirm that the 485 works, I connected the ...
Ben, the error is on the manually created COM port. There is no difference to the view if I plug in the USB or not. And no, the COM port doesn\'t disappear when I unplug the USB. The two vers...
There is a difference though now when I run the BMS software. I don\'t get error 1073807343 anymore, but rather this new 7346 message. End result is still the same - No COM port to select in the...
First of all, thanks for the help! Here\'s the screenshots from the device manager. First one is with no COM ports listed. Plugging in the USB cable makes no difference - same view with or wi...
Hi Rick Thanks for the info. I installed the driver\'s (on two separate Windows 10 PC\'s) but still have no luck. There is no response/recognition when I plug the USB cable into either mac...
Hi I\'m having some issues with connecting to the REC Active I\'m running Windows 10. When starting the BMS Control software (as an Admin) I get an Error -1073807343 message (See Error me...
