Posts made by Darryl

• Erratic reading from current shunt

  @tine , @Rick I owe you both an apology as I have only now gotten to running through Tine's trouble shooting steps.  The 50+ amps showing as coming in hasn't caused an issue so I've not made ...

  posted in REC Active BMS

  D

  Darryl
  5/18/24, 8:30 PM
• Erratic reading from current shunt

  @Neil did you have any luck solving your issues?  Mine have cropped up again.  I will be carefully checking wiring but it sounds from Edward's experience that this is more likely firmware...

  posted in REC Active BMS

  D

  Darryl
  12/12/23, 1:50 AM
• Erratic reading from current shunt

  @Edward Its been a long time since I started this thread and that's because I thought my issues had gone away.  Turns out I was wrong.  Should have known that things don't fix themselves...

  posted in REC Active BMS

  D

  Darryl
  12/12/23, 1:48 AM
• Erratic reading from current shunt

  And now it's back to normal.  🙄 I did install a short length of AC wire in the same vicinity (6-10") as the shunt sense wires yesterday afternoon but the log shows the initial issues coming u...

  posted in REC Active BMS

  D

  Darryl
  4/15/23, 4:47 PM
• Erratic reading from current shunt

  Well, that was short lived.  Readings are going haywire again.  Victron battery monitor shows +2.8A which is in line with the equipment currently running and limited sunlight fom solar to...

  posted in REC Active BMS

  D

  Darryl
  4/15/23, 4:30 PM
• Erratic reading from current shunt

  I've got the REC ABMS on my liveaboard sailboat.  Yesterday (according to the logs)  I had the current reading from my shunt go a little haywire.  It has been reading between -50A an...

  posted in REC Active BMS

  D

  Darryl
  4/15/23, 2:26 PM