after a lot of head-scratching I finally got this:
after a lot of head-scratching I finally got this:
@Rick a couple of reboots and CAN details are all back working on the Cerbo screen, something obviously got out of whack! appreciate your help
@Rick yep that fixed seeing it in the WiFi module (I clearly forgot about setting that when I originally installed it 😊😃 Still can't see it on the CAN network though 😢
My Abms has been working flawlessly but I got a new router and needed to reset the WiFi so I pressed the reset button on the rec WiFi for 20 seconds and now I can't see the abms. The ABMS green le...
@Rick awesome, do you have any details on how and what to query the wifi module? is there a list of URL syntax? i just want the individual cells, temp, amps etc
Has anyone played with getting data out of the ABMS either via RS485 or via Wifi module web server queries to home assistant. ideally, I would like to get realtime battery health and individual ce...
@tine As I move the wires around it does go all over the place so fingers crossed it's just the loom. Any chance of getting hold of a spare board and cable to be able to rule out one or other 🙏🫶
Still pulling my hair out though I think it's the cable..... I have opened up the BMS and have continuity between pin 24 and 25 of the main connector back to R46 and R47 R46 measure resistance of...
Has anyone come up with a reliable solution to this problem? I went out for a week and can't use or trust the capacity battery percentage anymore. super frustrating!
Here is an example captured tonight, the boat is pretty much idle plugged into shore power with an actual current draw of 184W the only loads are just 2 fridges wifi router, and a victron Cerbo tot...
have had the same thing happen to my system recently suddenly strange ghost loads appearing i had one over noght that too the 4s pack down to what it thought was 8% capacity but the voltage was sat...