OK, I solved my problem. There was a setting in the Cerbo GX that enabled the sending of NMEA200 Output data. It had to be enabled.
OK, I solved my problem. There was a setting in the Cerbo GX that enabled the sending of NMEA200 Output data. It had to be enabled.
I just installed twin engine wakespeed regulators with Balmar alternators. Both Alternators are connected to the house batteries. Wakespeed current sense wires are connected to de...
Ok, thanks for the feedback. I like the Idea of connecting the Wakespeed up to the Altenator shunts because I then have more options for control. Connecting up to the Battery Smart shun...
I currently have a marine twin engine application with a Victron Smart Shunt connected to a Victron Cerbo GX for house battery monitoring. I just purchased two Wakespeed 500 regulators to con...
