A full reset, completely powering off the REC, resolved it.
A full reset, completely powering off the REC, resolved it.
Yeah, it's still not happy: I don't see any packets there, from the REC, eh?
@Rick I figured that… I reset CHRG to 1, CANS is still 3 which I believe to be correct for the Cerbo's 500 kbit CAN-BMS port. Still nothing, unless I need to reset/reboot something to get t...
Any idea why I would have lost the CAN comms between the BMS and the Cerbo GX when I upgraded to firmware v1.5? I didn't change anything else. A.
@tine That is interesting, thank you for posting. With the current code, when will the warning be triggered? If I understand you correctly, you are saying that the new code will allow the balanci...
There is not an easy way of coping them, so here are some screenshots:
@panagiotis So far: nothing. The issue stopped happening. I suspect the cells must be more closely balanced, now.
