We got to the bottom of this one.  It seems that on newer Windows 10 installs they have removed some needed security libraries we were using.  We have now updated this to meet the latest Windows 10...

Porting software code between operating systems can be a frustrating experience.  What works well in Windows may behave very differently in Unix/MacOS.  For instance the software also relies on spe...

The CANBus ports are for connecting to your CANBus (usually your engine computer)or NMEA2000 instrument network.  The programming tool connects to the USB port which can be found inside the enclosure.

Hi, to access the USB port on the WS500 you need to remove the 4 screws on the cover plate and it is located in the top left corner just above the dip switches.  Once you connect it to your PC, cli...

Hi, to access the USB port on the WS500 you need to remove the 4 screws on the cover plate and it is located in the top left corner just above the dip switches.  Once you connect it to your PC, cli...

Is there an update on the IOS software for an iPad?

Found the software but it is saying I need a USB connection.  I only have two CANbus connection with RJ45 connections.  I did plug that in bit it still says its looking for the USB connection.  Can...

Where and how do I get it?  

Windows 1.0.2 X64 is now released and available for download! Mac OS build is in development and code is being ported over.  Look for its release in the next month!

One user has reported a TLS error but we are having troubles zeroing in on the issue.  If anyone else has had similar issues please let us know and any detail would be appreciated