Does soemone has a working setup with the REC2Q BMS and the WS500?
Can you share your settings?
I dont get the communication established with the rec 2Q BMS.
First time I installed this BMS 2Q BMS, I connect a lot ABMS with the WS500, and they work fine.
Problem I have is logfile from ws500 dont start showing 39.
I have hecked the cable or the correct pin CAN L and CAN H are connected according to the manuals.
This is the REC setting I made.
CANS setting 2
CHRG setting 1
This are my WS500 settings.
CST;,1,0,1,70, ,1,1, ,1,1,1, ,0,0,3, ,128, ,0,0,0
SST;,AREG2.5.1-BETA, ,0,1, ,8,0.80,2.00, ,0,0, ,0,-12, ,1
SCV;,0,0,0,2.00,0.80,8, ,95,1.00,0.75,0.50,-1, ,0,0, ,2,2.393,10000, ,0,0,15,1,0.00,0,0,16,0, ,0,0
CPE;,8,14.60,60,25,0, ,0,0,0.00,0, ,13.50,0,0,0,-50,13.20, ,0,0.00,0, ,0.00,0,0,0, ,0.000,0,-20,60, ,0.00,0,45,50,80, ,100, ,0.00,0.00
Any advise is welcome.
